Power On Self Test screen, press DEL key to enter the BIOS settings interface.

     The first step into the Advanced Bios Features, if the CPU supports energy-saving features recommended first CPU Enhanced Halt (C1E) and CPU EIST Function closure. To avoid affecting the overclocking stability.

     The second step, into the overclocking option (Over clocking), adjustable CPU Frequency Setting (FSB), each plus 10Mhz, if the CPU multiplier is not locked in the CPU Clock Ratio (Multiplier) regulation, frequency = FSB × multiplier. At the same time the need for rational use of memory, DRAM Frequency divider setting. Press F10 to save and exit

     The third step, if the light into the system, would like to continue to restart the CPU FSB coupled with ultra-10-50, repeat one, two-step, if you want to overclock to achieve the values of Kaoji test the stability, it is recommended to use SP2004, etc. make CPU full load, 30 minutes of Baocuo basically no problem!
    
     Plane to ask if they can not wait for the system will automatically restore BIOS default settings. Re-enter the BIOS to set the CPU Frequency adjustment to a low of 10 to 20, repeat step 1.
    
     N If you wait a long time also they can not machine, you need to open the case to clear CMOS jumper to change to the location of 3 ~ 5 seconds, then change it back jumper, this time to restore the CMOS back to factory settings. To do the above method is to find the maximum CPU frequency.